PM16 Peripheral Pumps
+
  • PM16 Peripheral Pumps

PERFOMANCE RANGE

※ Flow rate up to 40L/ min(2.4m³/h)

※ Head up to 38m

OPERATING LIMITS

※ Suction lift up to 8m

※ Fluid temperature up to 60℃

※ Maximum ambient temperature 40℃

N. DESCRIPTION N. DESCRIPTION N. DESCRIPTION
1 Bolt 13 Rotor 25 Tie-rod
2 "O" ring 14 Split ring 26 Fan
3 Charge plug 15 Terminal board 27 Fan cover
4 Pump casing 16 Gasket gasket 28 Washer
5 "O" ring 17 Terminal cover    
6 Impeller 18 Fairlead    
7 Snap ring 19 Bolt    
8 Mechanical seal 20 Casing with wound stator    
9 Pump support 21 Motor housing    
10 Drops guard 22 Capacitor cover    
11 Bearing 23 Capacitor    
12 Key 24 Driving Cap    

PUMPS INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. Reliable, economical and simple to use, they are suitable for domestic applications and the automatic distribution of water from surge tanks, watering gardens and for boosting insufficient mains water pressure. These pumps should be installed in a covered area, protected against the weather.

PERFORMANCE

※ High heads with respect to power requirements.

※ Stable operating curves, with small variations in delivery rates with respect to large variations in the pressure demand.

※ High tolerance of the presence of entrained air in the liquid being pumped.

PUMP

※ Cast iron pump body and support under special anti-rust treatment.

※ Rust-free stainless steed inserts prevent impeller's block when starting after the pump is unused for a long time

※ Brass impeller with evenly arranged radial vanes

※ Stainless steel mechanical seal (graphite to ceramic)

※ AISI 304 shaft

MOTOR

※ C&U bearing

※ Motor with copper winding

※ Built-in thermal protector for single phase motor

※ Insulation class :F

※ Protection class:IPX4

WARRANTY:1 YEAR(according to our general sales conditions) 

PUMP MODEL POWER DNA DNM Q
m³/h
0 0.3 0.6 1.2 1.8 2.4
Single Phase Three Phase KW HP nch Inch L/ min 0 5 10 20 30 40
PM16 - 0.37 0.5 1" 1" H(m) 38 35 30 21 13 5

Keywords

PM16 Peripheral Pumps

These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. Reliable, economical and simple to use, they are suitable for domestic applications and the automatic distribution of water from surge tanks, watering gardens and for boosting insufficient mains water pressure. These pumps should be installed in a covered area, protected against the weather.
PM16 Peripheral Pumps
+
  • PM16 Peripheral Pumps

Classification


Get A Quote

Note: Please leave your contact information and our professionals will contact you as soon as possible!

Submit

Copyright © 2025 ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD

Business License