PERFOMANCE RANGE
※ Flow rate up to 60L/ min(3.6m³/h)
※ Head up to 48m
OPERATING LIMITS
※ Suction lift up to 9m
※ Fluid temperature up to 40℃
※ Maximum ambient temperature 40℃
| N. | DESCRIPTION | N. | DESCRIPTION | N. | DESCRIPTION |
| 1 | Charge plug | 13 | Pump casing cover | 25 | Casing with wound stator |
| 2 | "O" ring | 14 | Drops guard | 26 | Stand |
| 3 | Discharge plug | 15 | Pump support | 27 | Fairlead |
| 4 | Bolt | 16 | Bearing | 28 | Cable presser |
| 5 | Pump casing | 17 | Key | 29 | Bolt |
| 6 | "O" ring | 18 | Rotor | 30 | Fan |
| 7 | Venturi pipe | 19 | Split ring | 31 | Driving cap |
| 8 | Diffuser | 20 | Screw | 32 | Fan cover |
| 9 | Nut | 21 | Terminla l cover | 33 | Bolt |
| 10 | Impeller | 22 | Terminal board | 34 | Washer |
| 11 | Mechanical seal | 23 | Screw | ||
| 12 | "O" ring | 24 | Capacitor |
PUMPS INSTALLATION AND APPLICATIONS
These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. They are extremely reliable, economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and medium-sized surge tanks, watering gardens , etc, These pumps should be installed in a covered area, protected against the weather. N. B. It is always advisable to install a foot value or a non-return valve on the suction opening.
PERFORMANCE
The wide range of pumps in the TJmst series satisfies the most various operating requirements with features such as:
※ High heads with respect to power requirements;
※ Flat operating and power absorption curves, giving moderate curve variations with respect to large variations in delivery demand;
※ Very low noise levels within the field of application;
※ High tolerance of the presence of entrained air in the fluid to be pumped;
※ Suction capacity up to 9 meters.
PUMP
※ Stainless steel pump body
※ Stainless steel pump body cover
※ Stainless steel mechanical seal(graphite to ceramic or graphite to SiC)
※ Brass impeller with centrifugal radial flow type
※ Stainless steel shaft
MOTOR
※C&U bearing
※ Motor with copper winding
※ Built-in thermal protector for single phase motor
※ Insulation class :F
※ Protection class:IPX4
WARRANTY:1 YEAR(according to our general sales conditions)
| PUMP MODEL | POWER | DNA | DNM | m³/h | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 2.8 | 3.0 | 3.3 | 3.6 | ||
| Single Phase | Three Phase | KW | HP | Inch | Inch | L/ min | 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 47 | 50 | 55 | 60 |
| JS60S | - | 0.3 | 0.4 | 1" | 1" | H(m) | 30 | 26 | 23 | 20 | 18 | 16.5 | 15 | 13 | 11 | - | - | - | - |
| JS80S | - | 0.6 | 0.8 | 1" | 1" | 43 | 37 | 33 | 30 | 27 | 25 | 23 | 23 | 20 | 18 | - | - | - | |
| JS100S | - | 0.75 | 1.0 | 1" | 1" | 46 | 40 | 38 | 36 | 34 | 32 | 30 | 32 | 27 | 25 | 23 | 20 | - | |
Keywords
JS SELF-PRIMING"JET" PUMPS
Contact Us
Classification
Related Products
CONTACT
ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD
Add:No.23, Lianxin Road,Daxi Town,Wenling City,
Zhejiang Province, China
Tel:+86-576-86379900 86353398
Mobile:+86-18806860289
Fax:+86-576-86325908
E-mail:anatajusen@gmail.com
Copyright © 2025 ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD