PERFOMANCE RANGE
※ Flow rate up to 1200L/ min(71m³/h)
※ Head up to 20m
OPERATING LIMITS
※ Suction lift up to 7m
※ Fluid temperature up to 60℃
※ Maximum ambient temperature 40℃
| N. | DESCRIPTION | N. | DESCRIPTION | N. | DESCRIPTION |
| 1 | Discharge plug | 13 | Key | 25 | Driving cap |
| 2 | "O" ring | 14 | Rotor | 26 | Bolt |
| 3 | Charge plug | 15 | Split ring | 27 | Stand |
| 4 | Pump casing | 16 | Scerw | 28 | Stand pin |
| 5 | Nut | 17 | Terminal cover | 29 | Fan |
| 6 | Impeller | 18 | Terminal board | 30 | Fan cover |
| 7 | Snap ring | 19 | Capacitor | 31 | Bolt |
| 8 | Mechanical sea | 20 | Cable presser | 32 | Bearing |
| 9 | "O" ring | 21 | Scerw | 33 | Washer |
| 10 | Pump support | 22 | Fair lead | ||
| 11 | Pump casing cover | 23 | Casing with wound stator | ||
| 12 | Bolt | 24 | Bolt |
PUMPS INSTALLATION AND APPLICATIONS
Tcm pumps are specifically designed for domestic, agricultural and industrial use. Their performance levels mechanical design and structural materials are explicitly selected for these uses. The shapes of their volutes and impellers, with ample passages, make them suitable for pumping even fairly dirty water. They can achieve high delivery rates under continuous or heavy duty, making them advantageous for rain and gravity irrigation, for pumping water from lakes, rivers, wells, and for a wide variety of industrial uses where high delivery rates must be achieved at low to average heads. The pumps should be installed in a covered area, protected against the weather.
PERFORMANCE
Tcm pumps come in a wide and well-diversified range.
Characteristic curves for the different models are distributed in a ra tional and complementary manner, making it easy to select the model most suited to each specific user requirement.
Special design efforts were made to unify the entire TC m series, which is distinctive for its:
※ Especially ample characteristic curves
※ No surging phenomena even when pumping near minimum forecast delivery rates;
※ Performance cheracterized by high absolute values over the majority of the characteristic curve;
※ Flat absorption curves at high delivery rates, to prevent motor overloading even during prolonged use;
※ Good suction capacities at both low and high delivery rates.
PUMP
※ Cast iron pump body under special anti-rust treatment
※ Brass impeller with centrifugal radial flow type
※ Stainless steel shaft
※ With thermal overload protector in single phase motor all three phase motors require an adequate external motor protector, and connections are to be according to current standards
※ Stainless steel mechanical seal(graphite to ceramic or graphite to SiC)
MOTOR
※C&U bearing
※ Motor with copper winding
※ Built-in thermal protector for single phase motor
※ Insulation class :F
※ Protection class:IPX4
WARRANTY:1 YEAR(according to our general sales conditions)
| TYPE | POWER (KW) |
POWER (HP) |
H MAX (m) |
Q MAX (L/ min) |
SIZE (Inch) |
MAX. SUCT (m) |
PACKING QIY |
| MGA-1A | 0.75 | 1.0 | 20 | 200 | 1.5" ×1.5" | 9 | 1500 |
| MHF-5B | 0.75 | 1.0 | 14 | 400 | 2" ×2" | 9 | 1400 |
| MHF-5A | 1.1 | 1.5 | 18 | 500 | 2" ×2" | 9 | 1200 |
| MHF-5AM | 1.5 | 2.0 | 20 | 600 | 2" ×2" | 9 | 1200 |
| MHF-6D | 1.1 | 1.2 | 12 | 1000 | 3" ×3" | 9 | 850 |
| MHF-6C | 1.5 | 2.0 | 15 | 1100 | 3" ×3" | 9 | 850 |
| MHF-8B | 2.2 | 3.0 | 18.5 | 1200 | 3" ×3" | 9 | 750 |
| MHF-6A | 3.0 | 4.0 | 22 | 1300 | 3" ×3" | 9 | 750 |
| MHF-6DR | 1.1 | 1.5 | 12 | 1000 | 4" ×4" | 9 | 850 |
| MHF-6CR | 1.2 | 2.0 | 15 | 1100 | 4"×4" | 9 | 850 |
| MHF-8BR | 2.2 | 3.0 | 18 | 1200 | 4"×4" | 9 | 750 |
| MHF-6AR | 3.0 | 4.0 | 20 | 1300 | 4" ×4" | 9 | 750 |
Keywords
MHF Centrifugal Pumps
Contact Us
Classification
Related Products
CONTACT
ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD
Add:No.23, Lianxin Road,Daxi Town,Wenling City,
Zhejiang Province, China
Tel:+86-576-86379900 86353398
Mobile:+86-18806860289
Fax:+86-576-86325908
E-mail:anatajusen@gmail.com
Copyright © 2025 ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD