PERFOMANCE RANGE
※ Flow rate up to 225L/ min(13.5m³/h)
※ Head up to 57.3m
OPERATING LIMITS
※ Suction lift up to 7m
※ Fluid temperature up to 60℃
※ Maximum ambient temperature 40℃
| N. | DESCRIPTION | N. | DESCRIPTION | N. | DESCRIPTION |
| 1 | Bolt | 13 | Drops guard | 25 | Driving cap |
| 2 | Air valve assembly | 14 | Key | 26 | Tie-rodr |
| 3 | Discharge plug | 15 | Bearing | 27 | Fan |
| 4 | "O" ring | 16 | Rotor | 28 | Fan cover |
| 5 | Pump casing | 17 | Split ring | 29 | Charge plug |
| 6 | Nut | 18 | Bolt | 30 | "O" ring |
| 7 | Impeller | 19 | Terminal cover | 31 | Pump support |
| 8 | Disc | 20 | Capacitor | ||
| 9 | Gasket | 21 | Terminal box | ||
| 10 | Impeller | 22 | Casing with wound stator | ||
| 11 | Washer | 23 | Stand | ||
| 12 | Mechanical sea | 24 | Terminal board |
PUMPS INSTALLATION AND APPLICATIONS
These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components. These pumps are an obvious choice wherever there is a need for high head values hard to reach with single impeller pumps, all thanks to the following features: extremely high outputs, suitable for continuous and heavy-duty use and particularly adaptable to a wide range of particular applications. CB series pumps are extremely reliable, simple to use, quiet and virtually maintenance-free, finding many uses in domestic, civil and industrial applications, the automatic distribution of water from surge tanks, watering gardens, increasing the mains supply pressure feeding boilers, cooling systems and fire-fighting units. These pumps should be installed in a covered area, protected against the weather.
PERFORMANCE
※ Particularly amp le and stable characteristic curves(high ratio between minimum and maximum head values)
※ Outputs having high absolute values and tendencially flat curves;
※ Flat absorption curves at high delivery rates, preventing motor overloading even during prolonged use.
※ Good suction capacities both at low and high delivery rates
PUMP
※ Cast iron suction body
※ Cast iron delivery body
※ Brass impellers with centrifugal radial flow type
※ Stainless steel shaft(45# steel up to 0.75kw)
※ Stainless steel mechanical seal(graphite to ceramic or graphite to SiC)
※ With thermal overload protector in single phase motor up to 1.5KW
The remaining single phase motors and all three phase motors require an adequate extemal motor protector,with connections according to current standards.
MOTOR
※C&U bearing
※ Motor with copper winding
※ Built-in thermal protector for single phase motor
※ Insulation class :F
※ Protection class:IPX4
WARRANTY:1 YEAR(according to our general sales conditions)
| TYPE | POWER (KW) |
POWER (HP) |
H MAX (m) |
Q MAX (L/ min) |
SIZE (Inch) |
MAX. SUCT (m) |
| SCM22 | 0.37 | 0.5 | 22 | 60 | 1"×1" | 9 |
| SCM42 | 0.55 | 0.75 | 28 | 80 | 1"×1" | 9 |
| SCM52 | 0.75 | 1.0 | 32 | 100 | 1"×1" | 9 |
| SCM2-50 | 1.1 | 1.5 | 52 | 100 | 1.25" ×1" | 9 |
| SCM2-60 | 1.5 | 2.0 | 60 | 110 | 1.25" ×1" | 9 |
| SCM2-68 | 2.2 | 3.0 | 68 | 180 | 1.5" ×1" | 9 |
| SCM2-80 | 3.0 | 4.0 | 80 | 200 | 1.5" ×1.25" | 9 |
Keywords
Scm Twp-Stage Centrifugal Pumps
Contact Us
Classification
Related Products
CONTACT
ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD
Add:No.23, Lianxin Road,Daxi Town,Wenling City,
Zhejiang Province, China
Tel:+86-576-86379900 86353398
Mobile:+86-18806860289
Fax:+86-576-86325908
E-mail:anatajusen@gmail.com
Copyright © 2025 ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD