PERFOMANCE RANGE
※Flow rate up to 60L/min(3.6m3/h)
※Head up to 45m
OPERATING LIMITS
※ Suction lift up to 9m
※Fluid temperature up to 40 ℃
※Maximum ambient temperature 40 ℃
| N. | DESCRIPTION | N. | DESCRIPTION |
| 1 | Pump casing | 11 | Stator |
| 2 | Venturi pipe | 12 | Terminal box |
| 3 | Diffuser | 13 | Capacitor |
| 4 | "O" ring | 14 | Terminal box cover |
| 5 | Impeller | 15 | Terminal board |
| 6 | Mechanical seal | 16 | Cable presser |
| 7 | Support | 17 | Rear cover |
| 8 | Bearing | 18 | Fan |
| 9 | Rotor | 19 | Fan cover |
| 10 | Charge plug | 20 | Stand |
PUMPS INSTALLATION AND APPLICATIONS
These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components.
They are extremely reliable, economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and medium-sized surge tanks watering gardens, etc. These pumps should be installed in a covered area, protected against the weather. N. B. It is always advisable to install a foot val ve or a non-return valve on the suction opening.
PERFORMANCE
The wide range of pumps in the JST series satisfies the most varied requirements with features such as:
※ High heads with respect to power requirements;
※ Flat operating and power absorption curves , giving moderate curve variations with respect to large variations in delivery demand;
※ High tolerance of the presence of entrained air in the fluid to be pumped;
※ Suction capacity up to 9 meters
PUMP
※ Cast iron pump body and support under special anti-rust treatment
※ Stainless steel mechanical seal(graphite to ceramic or graphite to SiC)
※BRASS impeller with centrifugal radial flow type
※ Stainless steel shaft
MOTOR
※C&U bearing
※ Motor with copper winding
※ Built-in thermal protector for single phase motor
※ Insulation class :F
※ Protection class:IPX4
WARRANTY:1 YEAR(according to our general sales conditions)
| PUMP MODEL | POWER | DNA | DNM | Q m³/h |
0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 3.0 | 3.6 | ||
| Single Phase | Three Phase | KW | HP | Inch | Inch | L/ min | 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 |
| JET-60P | JET-60P | 0.45 | 0.6 | 1" | 1" | H(m) | 38 | 37 | 26 | 20 | 16 | 12 | 8 | 7.5 | - | - | - |
| JET-80P | JET-80P | 0.6 | 0.8 | 1" | 1" | 42 | 41 | 32 | 26 | 22 | 18 | 14 | 10.5 | 8 | - | - | |
| JET-100P | JET-100P | 0.75 | 1.0 | 1" | 1" | 45 | 44 | 38 | 31.5 | 28.5 | 24 | 21 | 18 | 15.5 | 11.5 | 9 | |
Keywords
JET-100P Self-priming "JET" Pumps
Contact Us
Classification
Related Products
CONTACT
ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD
Add:No.23, Lianxin Road,Daxi Town,Wenling City,
Zhejiang Province, China
Tel:+86-576-86379900 86353398
Mobile:+86-18806860289
Fax:+86-576-86325908
E-mail:anatajusen@gmail.com
Copyright © 2025 ZHEJIANG JUSEN MECHANICAL AND ELECTRICAL CO.,LTD